It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
Community
Train FeverUnable to find path(4 posts)(4 posts)
(4 posts)
Pages:
1
This is my favourite topic
Posted February 22, 2017
What does “Unable to find path to stop” mean in terms of preventing it or fixing it?

TIA,
kk
No posts in this topic were marked as the solution yet. If you can help, add your reply
Posted February 23, 2017
Some/most tracks only go in one direction. You can turn the vehicle on the track once it is stopped and it may find its path again.

This is usually prevented by clever signaling.
Posted February 23, 2017
Are you getting this message when assigning a tram / train to a line?
In case it is a tram, check is the tram depot connected to tramway.
In case it is a train, see if the train can go to any station in the assigned line without flipping the train.
A new train will not leave depot unless it has a direct route to its assigned line.
OK: Depot > assigned station
NG: Depot > any not assigned station and make a U-turn > assigned station
Posted March 25, 2017
If you have layed new track or changed the track it could be that you many have a tiny break in the line. It has happened to me a couple of times. Follow the track from start to finish to see it this is the problem.
Pages:
1
This is my favourite topic
Community
Train FeverUnable to find path(4 posts)(4 posts)
(4 posts)