PC Building Simulator Update v1.12.3
Today we’re pushing another update live to address the issues listed below. Special thanks to the community for contributions to bug reporting and evidence gathering.

Additionally, we’re going to be testing out the first version of a short survey aimed at gathering information on bugs reported by players so watch out for initial testing of that on Discord. This should also help us get back to correctly crediting players by name for bugs which they’ve assisted us in fixing.

Bug Fixes:
Career:

Corrected the job text in the "Can you fix this???" job given by LargeSausage@MelaniePens.io to prevent the "Replace Reservoir" objective from being shown twice.
In the "you help us now" job given by 2049@gmcon.com players will no longer be asked to overclock the CPU to 0 Mhz.


Parts:

Reduced the number of instances in which non modular PSU cables would incorrectly route outside of case boundaries.
Fixed an issue which caused the Raijintek Pelias RGB fittings to incorrectly show up as EKWB copper fittings in lighting software.
Several Intel CPUs have had their TDP corrected to match official statistics.
Corrected the length of several water cooled EVGA GPUs.
SLI Bridges will now install correctly when mounting the GPU in the second slot first.
Lian Li cases now correctly allow installation of multi-slot height GPUs in vertical risers. – Shoutout to Sleepy, we’ll have to find something else to joke about now...
The MSI MEG B550 UNIFY-X motherboard now correctly supports Crossfire GPU configurations.
Adjusted 24 Pin cable routing to prevent clipping with the motherboard and case when installing a MSI Prestige X570 Creation in a Fractal Design Define 7 Clear TG case.
GPUs can now correctly be installed vertically in the MSI MPG SEKIRA 500X case.
Adjusted the preinstalled Fractal Design 140mm fans to prevent clipping in the front of the Fractal Design Define 7 XL case.
GPUs will no longer conflict with the second M.2 slot on the GIGABYTE X470 AORUS GAMING 7 WIFI motherboard.
The PSU mounts on the Fractal Design Meshify 2 and Define 7 cases now feature the correct number of screws.
The Thermaltake Core P5 case now correctly supports a 420mm AIO or radiator.
Fixed an issue which prevented the Fractal Design Meshify 2 and Define 7 from showing up when filtering for reservoir compatibility in the Water Cooling Shop.
Adjusted pathing for the NZXT Kraken X42's pipes to prevent clipping with other parts of the cooler.
Adjusted the placement of FSP PSUs inside the SilverStone LD01 case to prevent clipping with the PSU shroud.
Fixed an issue which allowed radiators to be installed despite not having enough clearance in the Fractal Design Define 7 and Meshify 2 cases.
Adjusted NVIDIA GeForce RTX 3090 FE and 3080 FE GPU cables to be routed more naturally.
Fixed an issue which prevented the installation of 280mm radiators in the top position of the CORSAIR Crystal Series 570X RGB case.
Fixed an issue which caused hard drive cables to clip through GPUs on the Open Benchtable OBT-BC1 case.
Fixed an issue which prevented the MSI MAG CORELIQUID series CPU Coolers from being installed in the Fractal Design Define 7 XL and Meshify 2 XL cases.
Adjusted placement of the Alphacool Eisstation DC-Ultra and CORSAIR XD3 RGB Combo reservoirs to prevent conflicts with radiators mounted in the top of the ASUS ROG Strix Helios case.
Fixed an issue which prevented some SSDs from being added if the MSI GeForce RTX 2070 SUPER Ventus GP OC GPU was already installed.
Adjusted placement of the ARCTIC 420mm AIO to prevent additional conflicts when installed in the Fractal Design Meshify 2 XL and Define 7 XL cases.
Adjusted the placement of the GamerStorm Captain 240 EX White RGB to prevent clipping when installed in the CORSAIR Crystal Series 280X RGB case.
Removing or installing the glass side panel of the In Win 303-MSI Dragon Edition no longer causes the PC to shut down.
Case fan cables no longer clip through the motherboard power cable when using braided cables inside the Cooler Master COSMOS C700P case.
Rerouted case power cables to prevent clipping with GPU cables inside the MSI MPG MAG Vampiric 010 case.
Hard drive cables are now routed more naturally inside the NZXT H440 Hyper Beast case.
Adjusted the drive bays inside the SilverStone PM01-RGB to prevent clipping with the case side panel.
Reduced the number of instances where players can install or remove PSU shrouds while the power cord is plugged in.
When moving around a dusty Raijintek Asterion Plus case the dust no longer periodically flashes.
Minor tweaks have been made to the connectors on the Fractal Design Dynamic X2 GP-12 (White) to prevent them clipping with the fan's frame.
It is now easier to install an additional GPU horizontally if one is already installed.


Localisation:

Players can now correctly see GPU Temperatures in applications when playing with the language set to Polish.
Fixed an issue which caused save files becoming corrupted when the Simplified Chinese language option was selected.


Miscellaneous:

The title logo will now show correctly on ultrawide displays.
Fixed an issue which required users to press Esc twice to return to the Main Menu from the Career Load Menu.
Players will no longer see erroneously placed prompts when holding RMB while holding the Compressed Air on a dusty PC.
The Music Volume slider from Options now also influences the slider in the Music Player app.
System Info's horizontal scrolling bar no longer disappears when changing the application into full screen view.


Stay up to date:
Do you put screens on your CPU cooler? Do you put screens on your GPU cooler? Do you put screens on your case front panel? Do you put screens on your case side panel? Come talk to us on all our official platforms here:
Discord / Twitter / Facebook / Instagram / Reddit / YouTube

Cheers,
The PC Building Simulator Team