It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
avatar
jamyskis: ...
avatar
Stuff: Open the attached and save as a psd or whatever your program of choice requires to create a template. This is the standard size I used (300 dpi) but some folks are using other sizes. It was always easier to post this template than post a large psd. The GOG logos are available on the GOG site IIRC. Google for the Windows logos.

If you can't find the logos, let me know and I will post them here.
Top stuff. Thanks!
Pre-empting the very likely release of Ultima IX, if not tomorrow, then certainly in the near future, here's my Ultima Anthology pack design as a first attempt, not including Worlds of Ultima and Ultima Underworld.

Here we go: http://i.cubeupload.com/SLf83J.png

Feedback gladly received!
Post edited August 01, 2012 by jamyskis
avatar
jamyskis: Pre-empting the very likely release of Ultima IX, if not tomorrow, then certainly in the near future, here's my Ultima Anthology pack design as a first attempt, not including Worlds of Ultima and Ultima Underworld.

Here we go: http://i.cubeupload.com/SLf83J.png

Feedback gladly received!
That's pretty good for a first attempt.
avatar
jamyskis: Feedback gladly received!
For simplicity I would suggest you consider maintaining the standard template size (6.3 " x 4.2 ") for your covers (see attached "compare.jpg"). That would make it easier for someone to print following the original printing instructions found here. Some folks might find the larger size of your image difficult to print if they were not used to printing images.

Some of us who used to make covers decided to increase the cover ppi to 300 for better printing but keep the original size in order to maintain consistency from the first covers produced to the last covers produced. We did that to hopefully not cause less knowledgeable community members unnecessary confusion about the printing procedure.

The 72 ppi you are using will not print as clearly as a 300 ppi cover image but use it if you prefer that dpi, no real rules concerning the covers AFAIK. . . =)

Although way out-dated I will attach the old Word 2K printing instructions here as well. I never got around to making them for Word 2007 / 2010.

Edit: Couple of years ago we re-made all of Red_153D's original covers at the 6.3 " x 4.2 " @ 300 ppi so almost all of the existing covers are consistent. Covers made in the past six months or so may not be at the standard size as a few may have been made at sizes / ppi other than the standard we were using. Since our guidelines sorta came about over time and without anyone posting them . . new submissions would vary. The templates we posted were always at the standard sizes though.


>>> Old Cover List <<<
This cover list will not contain any covers for games released after November 07, 2011. It is no longer being updated.
************************
Up-to-date Cover List can be found on Google Docs <span class="bold">-&gt;:: here ::&lt;-</span>

.
Attachments:
compare.jpg (435 Kb)
Post edited August 01, 2012 by Stuff
avatar
jamyskis: Feedback gladly received!
avatar
Stuff: For simplicity I would suggest you consider maintaining the standard template size (6.3 " x 4.2 ") for your covers (see attached "compare.jpg"). That would make it easier for someone to print following the original printing instructions found here. Some folks might find the larger size of your image difficult to print if they were not used to printing images.

Some of us who used to make covers decided to increase the cover ppi to 300 for better printing but keep the original size in order to maintain consistency from the first covers produced to the last covers produced. We did that to hopefully not cause less knowledgeable community members unnecessary confusion about the printing procedure.

The 72 ppi you are using will not print as clearly as a 300 ppi cover image but use it if you prefer that dpi, no real rules concerning the covers AFAIK. . . =)

Although way out-dated I will attach the old Word 2K printing instructions here as well. I never got around to making them for Word 2007 / 2010.

Edit: Couple of years ago we re-made all of Red_153D's original covers at the 6.3 " x 4.2 " @ 300 ppi so almost all of the existing covers are consistent. Covers made in the past six months or so may not be at the standard size as a few may have been made at sizes / ppi other than the standard we were using. Since our guidelines sorta came about over time and without anyone posting them . . new submissions would vary. The templates we posted were always at the standard sizes though.


&gt;&gt;&gt; Old Cover List &lt;&lt;&lt;
This cover list will not contain any covers for games released after November 07, 2011. It is no longer being updated.
************************
Up-to-date Cover List can be found on Google Docs <span class="bold">-&gt;:: here ::&lt;-</span>

.
Thanks for the feedback!

I've put a new one up now at 175dpi:

http://i.cubeupload.com/slWGI9.png

I did try a 300dpi Lanszos upscaled image, which allowed printing dimensions of 273x183mm, but unfortunately the pic size always ends up over 5MB, which Cubeupload won't allow.
avatar
jamyskis: Thanks for the feedback!

I've put a new one up now at 175dpi:
You're welcome, it looks great. You might try saving it to a jpg file. Most photo editing programs give you some control over the compression. The attached is showing the PS jpg save dialog with slider. I usually try to get the size to be between 800K and 1.2K.

I use both png and jpg but find jpeg more convenient for sizing with little or no difference in image quality . . at least for this use. I can upload the jpg of your cover if you would like to compare it to the png.
Attachments:
sizeadj.jpg (84 Kb)
avatar
jamyskis: Thanks for the feedback!

I've put a new one up now at 175dpi:
avatar
Stuff: You're welcome, it looks great. You might try saving it to a jpg file. Most photo editing programs give you some control over the compression. The attached is showing the PS jpg save dialog with slider. I usually try to get the size to be between 800K and 1.2K.

I use both png and jpg but find jpeg more convenient for sizing with little or no difference in image quality . . at least for this use. I can upload the jpg of your cover if you would like to compare it to the png.
True, I've just tried it with 90% quality in GIMP and there don't seem to be any horrid compression artifacts that you usually associate with excessive JPEG compression. Came out as 1MB as well.

http://i.cubeupload.com/b5c9Uu.jpg
Post edited August 02, 2012 by jamyskis
avatar
jamyskis: ...
Looks great, you should be able to design directly in the template (above) at 300 ppi. Much less jaggies . . =)
avatar
jamyskis: Pre-empting the very likely release of Ultima IX, if not tomorrow, then certainly in the near future, here's my Ultima Anthology pack design as a first attempt, not including Worlds of Ultima and Ultima Underworld.

Here we go: http://i.cubeupload.com/SLf83J.png

Feedback gladly received!
Why is Revenge of the Enchantress listed twice? And why is Serpent Isle listed as part 2 and Silver Seed is listed as part 2 as well?
Prince of Persia: Warrior Within - http://u.cubeupload.com/CowboyBebop01/TNQnjR.png
Return to Mysterious Island - http://u.cubeupload.com/CowboyBebop01/hgyF6Z.png
Runaway 3: A Twist of Fate - http://u.cubeupload.com/CowboyBebop01/6zQh3z.png
Symphony - http://u.cubeupload.com/CowboyBebop01/SFmB8z.png
The Book of Unwritten Tales - http://u.cubeupload.com/CowboyBebop01/WpcztI.png
The Ball - http://u.cubeupload.com/CowboyBebop01/oKODcW.png
Unmechanical - http://u.cubeupload.com/CowboyBebop01/wtDUg5.png
Anyone making covers for the recent releases?
avatar
wolfsite: Anyone making covers for the recent releases?
I'll try doing an Ultima 9 cover.

Here it is: http://i.cubeupload.com/SgxCL1.png
Post edited August 24, 2012 by gameon
Just did a huge back up.

Here are some cases I made

http://img703.imageshack.us/img703/9311/1010008d.jpg
avatar
wolfsite: Anyone making covers for the recent releases?
avatar
gameon: I'll try doing an Ultima 9 cover.

Here it is: http://i.cubeupload.com/SgxCL1.png
Nice
avatar
gameon: I'll try doing an Ultima 9 cover.

Here it is: http://i.cubeupload.com/SgxCL1.png
avatar
the_bard: Nice
Thanks for the feedback!